CT711 RF噪声产生器和雷达仿真器，是用于WiFi无线区域网络测试。CT711使用修改后的韧体，以产生微秒精确度的RF噪声的脉冲串(burst)。突发脉冲串的宽度，间隔和数量都是可设置的。这可以模拟雷达脉冲串，因此可用于DFS的测试。

 

此外，本机可以产生不断的RF噪声，来对于WiFi设备的CCA功能进行测试。这是一个测试工具，并应使用在RF隔离箱内或其他不会受到合法RF设备或雷达设备干扰的空间。

 

 

 
Larger Images: board package 

NOTE: This product may have a different hardware configuration than the system pictured above. Refer to your official quote for details.

 

 

 

 

The CT711 RF Noise generator and RADAR Simulator is used for WiFi testing The CT711 uses modified firmware to generate micro-second precision bursts of RF Noise. The burst width, burst spacing, and number of bursts are configurable. This can simulate RADAR bursts and so be used for DFS testing.

 

In addition, this unit can create constant RF Noise to enabling testing CCA features in WiFi equipment. It is a test tool, and should be used in an RF Isolation chamber or other area where you will not interfere with legitimate RF Equipment or RADAR devices.

 

On occassion, especially with certain configured settings, the CT711 may have a corrupted on-air signal or fail to generate any signal at all. For this reason, we suggest testing in conjunction with an RF Analyzer so that you can be sure the on-air signal is as you expect.

 

The CT711 is controlled by the LANforge software suite, which includes a GUI management tool as well as CLI interface for automated scripting.

 

The CT711 has no moving parts and will fit into a small travel bag or briefcase for easy portability. The CT711 includes 2 USB WiFi NIC, RP-SMA Female cable assemblies and USB Cable.